Realm: medway.nhs.uk Full

medway.nhs.uk/ORPS: medway-nhs-uk-4
medway.nhs.uk/medway-nhs-uk-4/NRPS: roaming0.govroam.uk (212.219.190.139) - Port 1812 Drop / Bad Client Shared Secret / Unknown Client /
medway.nhs.uk/medway-nhs-uk-4/roaming0.govroam.uk/ Ping
Output
PING OK - Packet loss = 0%, RTA = 4.88 ms
Last State Change
Sun Jul 13 02:34:06 2025
Last Check
Sun Jul 13 13:33:57 2025
Next Check
Sun Jul 13 13:43:57 2025
medway.nhs.uk/medway-nhs-uk-4/roaming0.govroam.uk/ RADIUS Port
Output
OK: Port 1812 is probably open, unless there's a DROP firewall
Last State Change
Thu Jul 3 11:52:27 2025
Last Check
Sun Jul 13 13:32:25 2025
Next Check
Sun Jul 13 13:42:25 2025
medway.nhs.uk/medway-nhs-uk-4/roaming0.govroam.uk/ Server Shared Secret
Output
OK: Good shared secret over last day
Last State Change
Fri Jul 11 09:22:29 2025
Last Check
Sun Jul 13 13:32:27 2025
Next Check
Sun Jul 13 13:42:27 2025
medway.nhs.uk/medway-nhs-uk-4/roaming0.govroam.uk/ Simple Authentication
Output
WARNING: Timeout. No response from RADIUS server
Last State Change
Thu Jul 3 11:51:48 2025
Last Check
Sun Jul 13 13:39:46 2025
Next Check
Sun Jul 13 13:49:46 2025
Meaning:
An authentication attempt has been made using generic credentials and no response was received. It's expected that a RADIUS server would respond to non-existent credentials with an Access-Reject and if it didn't then there might be a problem. It's not part of the Tech Spec that all requests should be responded to but it's desirable. It would help us keep better track of your system state. However, be aware that all proxied/EAP requests MUST be responded to.
Solution:
Check your RADIUS logs to see what's happening to these requests. The username is 'jisctest' so should stand out. If you can, please ensure that your RADIUS server responds to the requests (with an Access-Reject). Alternatively, enable Status-Server (FreeRADIUS, RADIATOR and radsecproxy support it).
medway.nhs.uk/medway-nhs-uk-4/roaming0.govroam.uk/ Zombie
Output
UNKNOWN: No Data. No data but not marked as down within the last week
Last State Change
Thu Jul 3 11:55:27 2025
Last Check
Sun Jul 13 13:33:26 2025
Next Check
Sun Jul 13 13:43:26 2025
medway.nhs.uk/medway-nhs-uk-4/NRPS: roaming1.govroam.uk (212.219.209.43) - Port 1812 Drop / Bad Client Shared Secret / Unknown Client /
medway.nhs.uk/medway-nhs-uk-4/roaming1.govroam.uk/ Ping
Output
PING OK - Packet loss = 0%, RTA = 4.93 ms
Last State Change
Sun Jul 13 04:53:31 2025
Last Check
Sun Jul 13 13:33:20 2025
Next Check
Sun Jul 13 13:43:20 2025
medway.nhs.uk/medway-nhs-uk-4/roaming1.govroam.uk/ RADIUS Port
Output
OK: Port 1812 is probably open, unless there's a DROP firewall
Last State Change
Thu Jul 3 11:55:17 2025
Last Check
Sun Jul 13 13:35:16 2025
Next Check
Sun Jul 13 13:45:16 2025
medway.nhs.uk/medway-nhs-uk-4/roaming1.govroam.uk/ Server Shared Secret
Output
OK: Good shared secret over last day
Last State Change
Thu Jul 10 14:00:18 2025
Last Check
Sun Jul 13 13:40:17 2025
Next Check
Sun Jul 13 13:50:17 2025
medway.nhs.uk/medway-nhs-uk-4/roaming1.govroam.uk/ Simple Authentication
Output
WARNING: Timeout. No response from RADIUS server
Last State Change
Thu Jul 3 11:53:53 2025
Last Check
Sun Jul 13 13:31:51 2025
Next Check
Sun Jul 13 13:41:51 2025
Meaning:
An authentication attempt has been made using generic credentials and no response was received. It's expected that a RADIUS server would respond to non-existent credentials with an Access-Reject and if it didn't then there might be a problem. It's not part of the Tech Spec that all requests should be responded to but it's desirable. It would help us keep better track of your system state. However, be aware that all proxied/EAP requests MUST be responded to.
Solution:
Check your RADIUS logs to see what's happening to these requests. The username is 'jisctest' so should stand out. If you can, please ensure that your RADIUS server responds to the requests (with an Access-Reject). Alternatively, enable Status-Server (FreeRADIUS, RADIATOR and radsecproxy support it).
medway.nhs.uk/medway-nhs-uk-4/roaming1.govroam.uk/ Zombie
Output
UNKNOWN: No Data. No data but not marked as down within the last week
Last State Change
Thu Jul 3 11:55:58 2025
Last Check
Sun Jul 13 13:33:57 2025
Next Check
Sun Jul 13 13:43:57 2025
medway.nhs.uk/medway-nhs-uk-4/NRPS: roaming2.govroam.uk (212.219.247.59) - Port 1812 Drop / Bad Client Shared Secret / Unknown Client /
medway.nhs.uk/medway-nhs-uk-4/roaming2.govroam.uk/ Ping
Output
PING OK - Packet loss = 0%, RTA = 10.25 ms
Last State Change
Sat Jul 12 02:47:52 2025
Last Check
Sun Jul 13 13:37:41 2025
Next Check
Sun Jul 13 13:47:41 2025
medway.nhs.uk/medway-nhs-uk-4/roaming2.govroam.uk/ RADIUS Port
Output
OK: Port 1812 is probably open, unless there's a DROP firewall
Last State Change
Thu Jul 3 11:58:52 2025
Last Check
Sun Jul 13 13:38:51 2025
Next Check
Sun Jul 13 13:48:51 2025
medway.nhs.uk/medway-nhs-uk-4/roaming2.govroam.uk/ Server Shared Secret
Output
OK: Good shared secret over last day
Last State Change
Fri Jul 11 09:20:45 2025
Last Check
Sun Jul 13 13:30:41 2025
Next Check
Sun Jul 13 13:40:41 2025
medway.nhs.uk/medway-nhs-uk-4/roaming2.govroam.uk/ Simple Authentication
Output
WARNING: Timeout. No response from RADIUS server
Last State Change
Thu Jul 3 11:55:28 2025
Last Check
Sun Jul 13 13:33:27 2025
Next Check
Sun Jul 13 13:43:25 2025
Meaning:
An authentication attempt has been made using generic credentials and no response was received. It's expected that a RADIUS server would respond to non-existent credentials with an Access-Reject and if it didn't then there might be a problem. It's not part of the Tech Spec that all requests should be responded to but it's desirable. It would help us keep better track of your system state. However, be aware that all proxied/EAP requests MUST be responded to.
Solution:
Check your RADIUS logs to see what's happening to these requests. The username is 'jisctest' so should stand out. If you can, please ensure that your RADIUS server responds to the requests (with an Access-Reject). Alternatively, enable Status-Server (FreeRADIUS, RADIATOR and radsecproxy support it).
medway.nhs.uk/medway-nhs-uk-4/roaming2.govroam.uk/ Zombie
Output
UNKNOWN: No Data. No data but not marked as down within the last week
Last State Change
Thu Jul 3 11:55:12 2025
Last Check
Sun Jul 13 13:33:11 2025
Next Check
Sun Jul 13 13:43:10 2025
medway.nhs.uk/medway-nhs-uk-4/NRPS: roaming3.govroam.uk (195.194.21.203) - Port 1812 Drop / Bad Client Shared Secret / Unknown Client /
medway.nhs.uk/medway-nhs-uk-4/roaming3.govroam.uk/ Ping
Output
PING OK - Packet loss = 0%, RTA = 10.27 ms
Last State Change
Sat Jul 12 03:33:48 2025
Last Check
Sun Jul 13 13:33:37 2025
Next Check
Sun Jul 13 13:43:37 2025
medway.nhs.uk/medway-nhs-uk-4/roaming3.govroam.uk/ RADIUS Port
Output
OK: Port 1812 is probably open, unless there's a DROP firewall
Last State Change
Thu Jul 3 11:58:40 2025
Last Check
Sun Jul 13 13:38:38 2025
Next Check
Sun Jul 13 13:48:38 2025
medway.nhs.uk/medway-nhs-uk-4/roaming3.govroam.uk/ Server Shared Secret
Output
OK: Good shared secret over last day
Last State Change
Thu Jul 10 21:31:31 2025
Last Check
Sun Jul 13 13:31:30 2025
Next Check
Sun Jul 13 13:41:29 2025
medway.nhs.uk/medway-nhs-uk-4/roaming3.govroam.uk/ Simple Authentication
Output
WARNING: Timeout. No response from RADIUS server
Last State Change
Thu Jul 3 11:56:10 2025
Last Check
Sun Jul 13 13:34:08 2025
Next Check
Sun Jul 13 13:44:08 2025
Meaning:
An authentication attempt has been made using generic credentials and no response was received. It's expected that a RADIUS server would respond to non-existent credentials with an Access-Reject and if it didn't then there might be a problem. It's not part of the Tech Spec that all requests should be responded to but it's desirable. It would help us keep better track of your system state. However, be aware that all proxied/EAP requests MUST be responded to.
Solution:
Check your RADIUS logs to see what's happening to these requests. The username is 'jisctest' so should stand out. If you can, please ensure that your RADIUS server responds to the requests (with an Access-Reject). Alternatively, enable Status-Server (FreeRADIUS, RADIATOR and radsecproxy support it).
medway.nhs.uk/medway-nhs-uk-4/roaming3.govroam.uk/ Zombie
Output
UNKNOWN: No Data. No data but not marked as down within the last week
Last State Change
Thu Jul 3 11:59:10 2025
Last Check
Sun Jul 13 13:37:09 2025
Next Check
Sun Jul 13 13:47:09 2025
medway.nhs.uk/ORPS: medway-nhs-uk-5
medway.nhs.uk/medway-nhs-uk-5/NRPS: roaming0.govroam.uk (212.219.190.139) - Port 1812 Drop / Bad Client Shared Secret / Unknown Client /
medway.nhs.uk/medway-nhs-uk-5/roaming0.govroam.uk/ Ping
Output
PING OK - Packet loss = 0%, RTA = 5.07 ms
Last State Change
Sat Jul 12 04:09:17 2025
Last Check
Sun Jul 13 13:39:08 2025
Next Check
Sun Jul 13 13:49:07 2025
medway.nhs.uk/medway-nhs-uk-5/roaming0.govroam.uk/ RADIUS Port
Output
OK: Port 1812 is probably open, unless there's a DROP firewall
Last State Change
Thu Jul 3 11:54:06 2025
Last Check
Sun Jul 13 13:34:04 2025
Next Check
Sun Jul 13 13:44:04 2025
medway.nhs.uk/medway-nhs-uk-5/roaming0.govroam.uk/ Server Shared Secret
Output
UNKNOWN: No Data. No logs to check for last day
Last State Change
Thu Jul 3 11:53:13 2025
Last Check
Sun Jul 13 13:31:11 2025
Next Check
Sun Jul 13 13:41:11 2025
medway.nhs.uk/medway-nhs-uk-5/roaming0.govroam.uk/ Simple Authentication
Output
WARNING: Timeout. No response from RADIUS server
Last State Change
Thu Jul 3 11:54:53 2025
Last Check
Sun Jul 13 13:32:52 2025
Next Check
Sun Jul 13 13:42:51 2025
Meaning:
An authentication attempt has been made using generic credentials and no response was received. It's expected that a RADIUS server would respond to non-existent credentials with an Access-Reject and if it didn't then there might be a problem. It's not part of the Tech Spec that all requests should be responded to but it's desirable. It would help us keep better track of your system state. However, be aware that all proxied/EAP requests MUST be responded to.
Solution:
Check your RADIUS logs to see what's happening to these requests. The username is 'jisctest' so should stand out. If you can, please ensure that your RADIUS server responds to the requests (with an Access-Reject). Alternatively, enable Status-Server (FreeRADIUS, RADIATOR and radsecproxy support it).
medway.nhs.uk/medway-nhs-uk-5/roaming0.govroam.uk/ Zombie
Output
UNKNOWN: No Data. No data but not marked as down within the last week
Last State Change
Thu Jul 3 11:53:31 2025
Last Check
Sun Jul 13 13:31:30 2025
Next Check
Sun Jul 13 13:41:30 2025
medway.nhs.uk/medway-nhs-uk-5/NRPS: roaming1.govroam.uk (212.219.209.43) - Port 1812 Drop / Bad Client Shared Secret / Unknown Client /
medway.nhs.uk/medway-nhs-uk-5/roaming1.govroam.uk/ Ping
Output
PING OK - Packet loss = 0%, RTA = 4.81 ms
Last State Change
Thu Jul 3 11:54:37 2025
Last Check
Sun Jul 13 13:34:27 2025
Next Check
Sun Jul 13 13:44:27 2025
medway.nhs.uk/medway-nhs-uk-5/roaming1.govroam.uk/ RADIUS Port
Output
OK: Port 1812 is probably open, unless there's a DROP firewall
Last State Change
Thu Jul 3 11:57:54 2025
Last Check
Sun Jul 13 13:37:53 2025
Next Check
Sun Jul 13 13:47:53 2025
medway.nhs.uk/medway-nhs-uk-5/roaming1.govroam.uk/ Server Shared Secret
Output
UNKNOWN: No Data. No logs to check for last day
Last State Change
Thu Jul 3 11:55:06 2025
Last Check
Sun Jul 13 13:33:04 2025
Next Check
Sun Jul 13 13:43:04 2025
medway.nhs.uk/medway-nhs-uk-5/roaming1.govroam.uk/ Simple Authentication
Output
WARNING: Timeout. No response from RADIUS server
Last State Change
Thu Jul 3 11:56:10 2025
Last Check
Sun Jul 13 13:34:09 2025
Next Check
Sun Jul 13 13:44:09 2025
Meaning:
An authentication attempt has been made using generic credentials and no response was received. It's expected that a RADIUS server would respond to non-existent credentials with an Access-Reject and if it didn't then there might be a problem. It's not part of the Tech Spec that all requests should be responded to but it's desirable. It would help us keep better track of your system state. However, be aware that all proxied/EAP requests MUST be responded to.
Solution:
Check your RADIUS logs to see what's happening to these requests. The username is 'jisctest' so should stand out. If you can, please ensure that your RADIUS server responds to the requests (with an Access-Reject). Alternatively, enable Status-Server (FreeRADIUS, RADIATOR and radsecproxy support it).
medway.nhs.uk/medway-nhs-uk-5/roaming1.govroam.uk/ Zombie
Output
UNKNOWN: No Data. No data but not marked as down within the last week
Last State Change
Wed Jul 9 15:52:26 2025
Last Check
Sun Jul 13 13:32:24 2025
Next Check
Sun Jul 13 13:42:24 2025
medway.nhs.uk/medway-nhs-uk-5/NRPS: roaming2.govroam.uk (212.219.247.59) - Port 1812 Drop / Bad Client Shared Secret / Unknown Client /
medway.nhs.uk/medway-nhs-uk-5/roaming2.govroam.uk/ Ping
Output
PING OK - Packet loss = 0%, RTA = 10.28 ms
Last State Change
Sat Jul 12 06:16:51 2025
Last Check
Sun Jul 13 13:36:41 2025
Next Check
Sun Jul 13 13:46:41 2025
medway.nhs.uk/medway-nhs-uk-5/roaming2.govroam.uk/ RADIUS Port
Output
OK: Port 1812 is probably open, unless there's a DROP firewall
Last State Change
Thu Jul 3 11:55:01 2025
Last Check
Sun Jul 13 13:35:00 2025
Next Check
Sun Jul 13 13:45:00 2025
medway.nhs.uk/medway-nhs-uk-5/roaming2.govroam.uk/ Server Shared Secret
Output
UNKNOWN: No Data. No logs to check for last day
Last State Change
Thu Jul 3 11:58:44 2025
Last Check
Sun Jul 13 13:36:43 2025
Next Check
Sun Jul 13 13:46:43 2025
medway.nhs.uk/medway-nhs-uk-5/roaming2.govroam.uk/ Simple Authentication
Output
WARNING: Timeout. No response from RADIUS server
Last State Change
Thu Jul 3 11:55:54 2025
Last Check
Sun Jul 13 13:33:53 2025
Next Check
Sun Jul 13 13:43:53 2025
Meaning:
An authentication attempt has been made using generic credentials and no response was received. It's expected that a RADIUS server would respond to non-existent credentials with an Access-Reject and if it didn't then there might be a problem. It's not part of the Tech Spec that all requests should be responded to but it's desirable. It would help us keep better track of your system state. However, be aware that all proxied/EAP requests MUST be responded to.
Solution:
Check your RADIUS logs to see what's happening to these requests. The username is 'jisctest' so should stand out. If you can, please ensure that your RADIUS server responds to the requests (with an Access-Reject). Alternatively, enable Status-Server (FreeRADIUS, RADIATOR and radsecproxy support it).
medway.nhs.uk/medway-nhs-uk-5/roaming2.govroam.uk/ Zombie
Output
UNKNOWN: No Data. No data but not marked as down within the last week
Last State Change
Thu Jul 3 11:57:37 2025
Last Check
Sun Jul 13 13:35:36 2025
Next Check
Sun Jul 13 13:45:36 2025
medway.nhs.uk/medway-nhs-uk-5/NRPS: roaming3.govroam.uk (195.194.21.203) - Port 1812 Drop / Bad Client Shared Secret / Unknown Client /
medway.nhs.uk/medway-nhs-uk-5/roaming3.govroam.uk/ Ping
Output
PING OK - Packet loss = 0%, RTA = 10.24 ms
Last State Change
Sun Jul 13 11:31:37 2025
Last Check
Sun Jul 13 13:31:26 2025
Next Check
Sun Jul 13 13:41:26 2025
medway.nhs.uk/medway-nhs-uk-5/roaming3.govroam.uk/ RADIUS Port
Output
OK: Port 1812 is probably open, unless there's a DROP firewall
Last State Change
Thu Jul 3 11:59:18 2025
Last Check
Sun Jul 13 13:39:17 2025
Next Check
Sun Jul 13 13:49:17 2025
medway.nhs.uk/medway-nhs-uk-5/roaming3.govroam.uk/ Server Shared Secret
Output
UNKNOWN: No Data. No logs to check for last day
Last State Change
Sat Jul 12 16:53:54 2025
Last Check
Sun Jul 13 13:31:53 2025
Next Check
Sun Jul 13 13:41:52 2025
medway.nhs.uk/medway-nhs-uk-5/roaming3.govroam.uk/ Simple Authentication
Output
WARNING: Timeout. No response from RADIUS server
Last State Change
Thu Jul 3 11:57:04 2025
Last Check
Sun Jul 13 13:35:02 2025
Next Check
Sun Jul 13 13:45:02 2025
Meaning:
An authentication attempt has been made using generic credentials and no response was received. It's expected that a RADIUS server would respond to non-existent credentials with an Access-Reject and if it didn't then there might be a problem. It's not part of the Tech Spec that all requests should be responded to but it's desirable. It would help us keep better track of your system state. However, be aware that all proxied/EAP requests MUST be responded to.
Solution:
Check your RADIUS logs to see what's happening to these requests. The username is 'jisctest' so should stand out. If you can, please ensure that your RADIUS server responds to the requests (with an Access-Reject). Alternatively, enable Status-Server (FreeRADIUS, RADIATOR and radsecproxy support it).
medway.nhs.uk/medway-nhs-uk-5/roaming3.govroam.uk/ Zombie
Output
UNKNOWN: No Data. No data but not marked as down within the last week
Last State Change
Thu Jul 3 11:57:50 2025
Last Check
Sun Jul 13 13:35:47 2025
Next Check
Sun Jul 13 13:45:47 2025
medway.nhs.uk/ORPS: medway-nhs-uk-6
medway.nhs.uk/medway-nhs-uk-6/NRPS: roaming0.govroam.uk (212.219.190.139) - Port 1812 Drop / Bad Client Shared Secret / Unknown Client /
medway.nhs.uk/medway-nhs-uk-6/roaming0.govroam.uk/ Ping
Output
PING OK - Packet loss = 0%, RTA = 5.01 ms
Last State Change
Sat Jul 12 04:11:51 2025
Last Check
Sun Jul 13 13:31:41 2025
Next Check
Sun Jul 13 13:41:41 2025
medway.nhs.uk/medway-nhs-uk-6/roaming0.govroam.uk/ RADIUS Port
Output
OK: Port 1812 is probably open, unless there's a DROP firewall
Last State Change
Thu Jul 3 11:55:14 2025
Last Check
Sun Jul 13 13:35:13 2025
Next Check
Sun Jul 13 13:45:13 2025
medway.nhs.uk/medway-nhs-uk-6/roaming0.govroam.uk/ Server Shared Secret
Output
UNKNOWN: No Data. No logs to check for last day
Last State Change
Thu Jul 3 11:51:54 2025
Last Check
Sun Jul 13 13:39:53 2025
Next Check
Sun Jul 13 13:49:53 2025
medway.nhs.uk/medway-nhs-uk-6/roaming0.govroam.uk/ Simple Authentication
Output
WARNING: Timeout. No response from RADIUS server
Last State Change
Thu Jul 3 11:55:26 2025
Last Check
Sun Jul 13 13:33:25 2025
Next Check
Sun Jul 13 13:43:25 2025
Meaning:
An authentication attempt has been made using generic credentials and no response was received. It's expected that a RADIUS server would respond to non-existent credentials with an Access-Reject and if it didn't then there might be a problem. It's not part of the Tech Spec that all requests should be responded to but it's desirable. It would help us keep better track of your system state. However, be aware that all proxied/EAP requests MUST be responded to.
Solution:
Check your RADIUS logs to see what's happening to these requests. The username is 'jisctest' so should stand out. If you can, please ensure that your RADIUS server responds to the requests (with an Access-Reject). Alternatively, enable Status-Server (FreeRADIUS, RADIATOR and radsecproxy support it).
medway.nhs.uk/medway-nhs-uk-6/roaming0.govroam.uk/ Zombie
Output
UNKNOWN: No Data. No data but not marked as down within the last week
Last State Change
Thu Jul 3 11:55:57 2025
Last Check
Sun Jul 13 13:33:55 2025
Next Check
Sun Jul 13 13:43:55 2025
medway.nhs.uk/medway-nhs-uk-6/NRPS: roaming1.govroam.uk (212.219.209.43) - Port 1812 Drop / Bad Client Shared Secret / Unknown Client /
medway.nhs.uk/medway-nhs-uk-6/roaming1.govroam.uk/ Ping
Output
PING OK - Packet loss = 0%, RTA = 4.95 ms
Last State Change
Thu Jul 3 11:57:22 2025
Last Check
Sun Jul 13 13:37:12 2025
Next Check
Sun Jul 13 13:47:12 2025
medway.nhs.uk/medway-nhs-uk-6/roaming1.govroam.uk/ RADIUS Port
Output
OK: Port 1812 is probably open, unless there's a DROP firewall
Last State Change
Thu Jul 3 11:54:20 2025
Last Check
Sun Jul 13 13:34:17 2025
Next Check
Sun Jul 13 13:44:17 2025
medway.nhs.uk/medway-nhs-uk-6/roaming1.govroam.uk/ Server Shared Secret
Output
UNKNOWN: No Data. No logs to check for last day
Last State Change
Thu Jul 3 11:55:19 2025
Last Check
Sun Jul 13 13:33:18 2025
Next Check
Sun Jul 13 13:43:18 2025
medway.nhs.uk/medway-nhs-uk-6/roaming1.govroam.uk/ Simple Authentication
Output
WARNING: Timeout. No response from RADIUS server
Last State Change
Thu Jul 3 11:55:02 2025
Last Check
Sun Jul 13 13:33:00 2025
Next Check
Sun Jul 13 13:43:00 2025
Meaning:
An authentication attempt has been made using generic credentials and no response was received. It's expected that a RADIUS server would respond to non-existent credentials with an Access-Reject and if it didn't then there might be a problem. It's not part of the Tech Spec that all requests should be responded to but it's desirable. It would help us keep better track of your system state. However, be aware that all proxied/EAP requests MUST be responded to.
Solution:
Check your RADIUS logs to see what's happening to these requests. The username is 'jisctest' so should stand out. If you can, please ensure that your RADIUS server responds to the requests (with an Access-Reject). Alternatively, enable Status-Server (FreeRADIUS, RADIATOR and radsecproxy support it).
medway.nhs.uk/medway-nhs-uk-6/roaming1.govroam.uk/ Zombie
Output
UNKNOWN: No Data. No data but not marked as down within the last week
Last State Change
Thu Jul 3 11:53:59 2025
Last Check
Sun Jul 13 13:31:57 2025
Next Check
Sun Jul 13 13:41:57 2025
medway.nhs.uk/medway-nhs-uk-6/NRPS: roaming2.govroam.uk (212.219.247.59) - Port 1812 Drop / Bad Client Shared Secret / Unknown Client /
medway.nhs.uk/medway-nhs-uk-6/roaming2.govroam.uk/ Ping
Output
PING OK - Packet loss = 0%, RTA = 10.53 ms
Last State Change
Sun Jul 13 06:33:13 2025
Last Check
Sun Jul 13 13:33:02 2025
Next Check
Sun Jul 13 13:43:02 2025
medway.nhs.uk/medway-nhs-uk-6/roaming2.govroam.uk/ RADIUS Port
Output
OK: Port 1812 is probably open, unless there's a DROP firewall
Last State Change
Thu Jul 3 11:58:54 2025
Last Check
Sun Jul 13 13:38:53 2025
Next Check
Sun Jul 13 13:48:53 2025
medway.nhs.uk/medway-nhs-uk-6/roaming2.govroam.uk/ Server Shared Secret
Output
UNKNOWN: No Data. No logs to check for last day
Last State Change
Thu Jul 3 11:57:17 2025
Last Check
Sun Jul 13 13:35:15 2025
Next Check
Sun Jul 13 13:45:15 2025
medway.nhs.uk/medway-nhs-uk-6/roaming2.govroam.uk/ Simple Authentication
Output
WARNING: Timeout. No response from RADIUS server
Last State Change
Thu Jul 3 11:55:23 2025
Last Check
Sun Jul 13 13:33:21 2025
Next Check
Sun Jul 13 13:43:21 2025
Meaning:
An authentication attempt has been made using generic credentials and no response was received. It's expected that a RADIUS server would respond to non-existent credentials with an Access-Reject and if it didn't then there might be a problem. It's not part of the Tech Spec that all requests should be responded to but it's desirable. It would help us keep better track of your system state. However, be aware that all proxied/EAP requests MUST be responded to.
Solution:
Check your RADIUS logs to see what's happening to these requests. The username is 'jisctest' so should stand out. If you can, please ensure that your RADIUS server responds to the requests (with an Access-Reject). Alternatively, enable Status-Server (FreeRADIUS, RADIATOR and radsecproxy support it).
medway.nhs.uk/medway-nhs-uk-6/roaming2.govroam.uk/ Zombie
Output
UNKNOWN: No Data. No data but not marked as down within the last week
Last State Change
Thu Jul 3 11:57:12 2025
Last Check
Sun Jul 13 13:35:10 2025
Next Check
Sun Jul 13 13:45:10 2025
medway.nhs.uk/medway-nhs-uk-6/NRPS: roaming3.govroam.uk (195.194.21.203) - Port 1812 Drop / Bad Client Shared Secret / Unknown Client /
medway.nhs.uk/medway-nhs-uk-6/roaming3.govroam.uk/ Ping
Output
PING OK - Packet loss = 0%, RTA = 10.34 ms
Last State Change
Fri Jul 11 12:20:55 2025
Last Check
Sun Jul 13 13:30:43 2025
Next Check
Sun Jul 13 13:40:43 2025
medway.nhs.uk/medway-nhs-uk-6/roaming3.govroam.uk/ RADIUS Port
Output
OK: Port 1812 is probably open, unless there's a DROP firewall
Last State Change
Thu Jul 3 11:59:42 2025
Last Check
Sun Jul 13 13:39:40 2025
Next Check
Sun Jul 13 13:49:40 2025
medway.nhs.uk/medway-nhs-uk-6/roaming3.govroam.uk/ Server Shared Secret
Output
UNKNOWN: No Data. No logs to check for last day
Last State Change
Thu Jul 3 11:55:56 2025
Last Check
Sun Jul 13 13:33:54 2025
Next Check
Sun Jul 13 13:43:54 2025
medway.nhs.uk/medway-nhs-uk-6/roaming3.govroam.uk/ Simple Authentication
Output
WARNING: Timeout. No response from RADIUS server
Last State Change
Thu Jul 3 11:57:25 2025
Last Check
Sun Jul 13 13:35:23 2025
Next Check
Sun Jul 13 13:45:23 2025
Meaning:
An authentication attempt has been made using generic credentials and no response was received. It's expected that a RADIUS server would respond to non-existent credentials with an Access-Reject and if it didn't then there might be a problem. It's not part of the Tech Spec that all requests should be responded to but it's desirable. It would help us keep better track of your system state. However, be aware that all proxied/EAP requests MUST be responded to.
Solution:
Check your RADIUS logs to see what's happening to these requests. The username is 'jisctest' so should stand out. If you can, please ensure that your RADIUS server responds to the requests (with an Access-Reject). Alternatively, enable Status-Server (FreeRADIUS, RADIATOR and radsecproxy support it).
medway.nhs.uk/medway-nhs-uk-6/roaming3.govroam.uk/ Zombie
Output
UNKNOWN: No Data. No data but not marked as down within the last week
Last State Change
Thu Jul 3 12:00:27 2025
Last Check
Sun Jul 13 13:38:26 2025
Next Check
Sun Jul 13 13:48:26 2025
Called Station ID Check
Output
WARNING: 100% Lower case characters in MAC (last: 2025-07-13 13:24:57). 100% Missing SSID, as of 2025-07-13 13:24:57. 99% MAC format wrong - uses ':' not '-' as separator (last: 2025-07-13 13:21:31). 0% MAC format wrong - should use a '-' to separate hex pairs (last: 2025-07-13 13:24:57)
Last State Change
Thu Jul 10 14:12:05 2025
Last Check
Sun Jul 13 13:27:02 2025
Next Check
Sun Jul 13 13:42:02 2025
Meaning:
The Called-Station-ID contains the MAC address of the device the client connects to as well as, potentially, the SSID of the wireless network it connected to. The format of the MAC address is specified in RFC 3580 as 'XX-XX-XX-XX-XX-XX:SSID' with '-' being the only valid separator and all upper case. The SSID should be appended.
Having the Called-Station-ID included in proxied requests makes it possible to ensure that the SSID being broadcast matches the service requirements.
Solution:
Configure your wireless system to provide the CSI in the RFC3580 format.
Calling Station ID Check
Output
WARNING: 0% MAC format wrong, missing separator (last: 2025-07-13 07:39:51). 100% MAC format wrong, contains lower case (last: 2025-07-13 13:21:31). 99% MAC format wrong, does not use '-' as separator (last: 2025-07-13 13:21:31)
Last State Change
Thu Jul 10 14:10:42 2025
Last Check
Sun Jul 13 13:25:41 2025
Next Check
Sun Jul 13 13:40:40 2025
Meaning:
Calling Station ID identifies the device making the connection and RFC 3580 states that the format should be XX-XX-XX-XX-XX-XX (i.e. '-' separated and upper case).
Solution:
Configure your wireless system to use upper case and '-' separated pairs.
Operator Check
Output
WARNING: 100% Missing Operator-Name (last: 2025-07-13 13:24:57)
Last State Change
Thu Jul 10 14:11:05 2025
Last Check
Sun Jul 13 13:26:04 2025
Next Check
Sun Jul 13 13:41:03 2025
Meaning:
Operator-Name is missing from RADIUS requests. Operator-Name identifies the site sending the requests and is used by home sites in audit trails and in cases of mis-use.
Solution:
Where possible (FreeRADIUS, radsecproxy, RADIATOR) Operator-Name should be configured to send the site identifier (in the format 1realm.name e.g. 1holby.nhs.uk).
Realm Syntax Check
Output
CRITICAL: 0.3% Realm same as Operator (last: 2025-07-13 08:59:11). 62.7% NULL realm (last: 2025-07-13 13:21:31)
Last State Change
Thu Jul 10 14:13:21 2025
Last Check
Sun Jul 13 13:28:18 2025
Next Check
Sun Jul 13 13:43:17 2025
Meaning:
The syntax of a realm proxied does not match what's acceptable. A realm should be in the format of 'realm.tld' or 'something.site.tld' and shouldn't have '..' or start or end with '.', shouldn't contain characters other than '0-9a-zA-Z-.', shouldn't be empty or missing. Since these realms are entered by end-users typos are possible. Obviously the NRPS should never see the site's own realm proxied as that could cause loops.
Solution:
Filter out syntactically invalid realms, don't proxy them.
VLAN Check
Output
OK: 100% No VLAN attr present (last: 2025-07-13 13:24:57)
Last State Change
Thu Jul 10 14:15:17 2025
Last Check
Sun Jul 13 13:30:15 2025
Next Check
Sun Jul 13 13:45:14 2025